About the Reinforcement Bar Weight Calculator
What is the Reinforcement Bar Weight Calculator?
This rebar weight calculator works like a simple bar bending schedule. List each bar size with its cutting length and number of bars to get the weight of each line and the total.
Add a wastage allowance for laps and offcuts and your TMT rate to get the steel cost.
How to use the Reinforcement Bar Weight Calculator
- Bars (one per line: diameter mm, cutting length m, number of bars) — one line per bar mark: diameter in mm, cutting length in m, number of bars. For example: 12, 12, 40. (sample: 12, 12, 40 10, 12, 60 8, 1.2, 200)
- Wastage & Laps (%) (sample: 3)
- TMT Rate (₹ per kg) (sample: 65)
- Press Calculate Rebar Weight (results also refresh as you type). The result card shows the Total Steel, along with Net weight (before wastage), In tonnes, Cost and Site rule.
Formula used
Weight = (π × d² ÷ 4) × 10⁻⁶ × 7,850 × Length × Number
- Site rule = kg per metre ≈ d² ÷ 162
Common weights per metre: 8 mm 0.395, 10 mm 0.617, 12 mm 0.888, 16 mm 1.58, 20 mm 2.47 kg.
Worked example
These are the sample values already filled in the calculator above, and the result it returns for them:
| Input | Sample value |
|---|---|
| Bars (one per line: diameter mm, cutting length m, number of bars) | 12, 12, 40 10, 12, 60 8, 1.2, 200 |
| Wastage & Laps (%) | 3 |
| TMT Rate (₹ per kg) | 65 |
| Result | Value |
|---|---|
| Total Steel | 993.7 kg |
| Net weight (before wastage) | 964.8 kg |
| In tonnes | 0.994 t |
| Cost | ₹64,591 |
| Site rule | Weight per metre ≈ d² ÷ 162 (d in mm) |
Tips for using the Reinforcement Bar Weight Calculator
- Include lap lengths and hooks in the cutting length.
- Allow 3–5% for wastage on typical building work.
