Skip to content
Advertisement
Hosinger Special Offer

Fourier Transform Calculator

Fourier Transform Calculator from Gizcalc helps you estimate results quickly within the Math & Statistics category.

  • Instant results
  • Charts & tables
  • Save & compare
  • Private – runs in your browser
Dominant Frequency —

Sample inputs are pre-filled so you can see a result quickly. Results are estimates only and may not be accurate because prices, interest rates, taxes, fees, fuel costs, tariffs, market returns, medical costs, and local rules can change. Please verify current values before making financial, tax, legal, medical, or business decisions.

Formula used

X(k) = Σₙ x(n) × e^(−2πikn ÷ N)

  • x(n) = sample n of the signal
  • N = the number of samples (here also the sampling rate, as the window is 1 second)
  • k = the frequency bin in Hz
  • Amplitude = 2 × |X(k)| ÷ N for 0 < k < N/2

About the Fourier Transform Calculator

What is the Fourier Transform Calculator?

The Fourier transform breaks a signal into the pure sine waves (frequencies) it is made of. It is how audio equalisers, MP3 compression, vibration analysis, radio receivers and image processing work: a messy wave over time becomes a clear list of frequencies and their strengths.

This calculator builds a test signal from two sine waves, samples it N times over one second and computes the discrete Fourier transform (DFT). The single-sided amplitude spectrum recovers each wave's frequency and amplitude, and the calculator warns when a frequency is too high for the sampling rate (aliasing).

How to use the Fourier Transform Calculator

  1. Wave 1 Amplitude (sample: 3)
  2. Wave 1 Frequency (Hz) (sample: 2)
  3. Wave 2 Amplitude (sample: 2)
  4. Wave 2 Frequency (Hz) (sample: 5)
  5. Samples in 1 Second (N) — this is also the sampling rate in samples per second. (sample: 32)
  6. Press Analyse Signal (results also refresh as you type). The result card shows the Dominant Frequency, along with Amplitude at that frequency, Second strongest frequency, Signal RMS and Nyquist limit (N ÷ 2).

Formula used

X(k) = Σₙ x(n) × e^(−2πikn ÷ N)

  • x(n) = sample n of the signal
  • N = the number of samples (here also the sampling rate, as the window is 1 second)
  • k = the frequency bin in Hz
  • Amplitude = 2 × |X(k)| ÷ N for 0 < k < N/2

The Nyquist limit is N ÷ 2: a sampled signal can only represent frequencies below half the sampling rate. Whole-number frequencies land exactly on a bin; other frequencies spread (“leak”) into neighbouring bins.

Worked example

These are the sample values already filled in the calculator above, and the result it returns for them:

InputSample value
Wave 1 Amplitude3
Wave 1 Frequency (Hz)2
Wave 2 Amplitude2
Wave 2 Frequency (Hz)5
Samples in 1 Second (N)32
ResultValue
Dominant Frequency2 Hz
Amplitude at that frequency3
Second strongest frequency5 Hz
Signal RMS2.5495
Nyquist limit (N ÷ 2)16 Hz
Aliasing warningNone – all frequencies are below the Nyquist limit

Tips for using the Fourier Transform Calculator

  • Sample at least twice as fast as the highest frequency you care about (the Nyquist–Shannon theorem); in practice 5 to 10 times faster is safer.
  • Try a 20 Hz wave with 32 samples: it shows up at 12 Hz — that is aliasing.
  • The RMS of two sine waves at different frequencies is √((A₁² + A₂²) ÷ 2); for amplitudes 3 and 2 that is √6.5 ≈ 2.55.

Frequently asked questions

It converts a signal from the time domain (value over time) into the frequency domain (strength of each frequency), revealing which pure tones make up the signal.

The FFT (fast Fourier transform) is an algorithm that computes exactly the same DFT much faster — in about N log N steps instead of N².

When a signal contains frequencies above half the sampling rate, they are misread as lower frequencies. A 20 Hz wave sampled 32 times a second appears as 32 − 20 = 12 Hz.

A real sine wave's energy is split equally between a positive and a negative frequency in the DFT. The single-sided spectrum adds them back together, so the peak equals the original amplitude.