About the Floor Plan Area Estimator
What is the Floor Plan Area Estimator?
A floor plan lists room dimensions, but rarely the total. This floor plan area calculator adds each room to estimate the carpet area, then adds a wall share for the built-up area.
Enter one room per line with its length and width in feet, including passages and utility areas.
How to use the Floor Plan Area Estimator
- Rooms (one per line: room, length ft, width ft) — one room per line: name, length, width in feet. For example: Bedroom 1, 12, 11. (sample: Living, 16, 12 Kitchen, 10, 8 Bedroom 1, 12, 11 Bedroom 2, 11, 10 Bath 1, 8, 5 Bath 2, 7, 5 Passage, 12, 4)
- Walls Share for Built-up Area (%) (sample: 10)
- Press Estimate Area from Rooms (results also refresh as you type). The result card shows the Estimated Carpet Area, along with Estimated built-up area, Rooms counted and Largest room.
Formula used
Carpet area ≈ Σ (Room length × Room width); Built-up ≈ Carpet × (1 + Walls %)
- Walls % = usually 10–15% for brick walls
RERA carpet area also includes internal partition walls, so the official figure can be slightly higher.
Worked example
These are the sample values already filled in the calculator above, and the result it returns for them:
| Input | Sample value |
|---|---|
| Rooms (one per line: room, length ft, width ft) | Living, 16, 12 Kitchen, 10, 8 Bedroom 1, 12, 11 Bedroom 2, 11, 10 Bath 1, 8, 5 Bath 2, 7, 5 Passage, 12, 4 |
| Walls Share for Built-up Area (%) | 10 |
| Result | Value |
|---|---|
| Estimated Carpet Area | 637 sq ft |
| Estimated built-up area | 701 sq ft |
| Rooms counted | 7 |
| Largest room | 192 sq ft |
Tips for using the Floor Plan Area Estimator
- Include passages, utility and store rooms; leave out balconies if you want the RERA carpet area.
- Compare your total with the carpet area in the builder's agreement.
