About the Factor of Safety Calculator
What is the Factor of Safety Calculator?
The factor of safety is how many times stronger a part is than it needs to be for its working load. It covers uncertainties in loads, materials, workmanship and analysis.
Enter strength and working stress, or failure load and working load.
How to use the Factor of Safety Calculator
- Based On (sample: Material strength and working stress)
- Strength (MPa) or Failure Load (kN) (sample: 250)
- Working Stress (MPa) or Working Load (kN) (sample: 150)
- Press Calculate Factor of Safety (results also refresh as you type). The result card shows the Factor of Safety, along with Margin of safety, Allowable working value at FoS 1.5 and Reading.
Formula used
FoS = Strength ÷ Working stress = Failure load ÷ Working load
- Margin of safety = FoS − 1
Codes such as IS 456 and IS 800 use partial safety factors on loads and materials instead of one overall factor.
Worked example
These are the sample values already filled in the calculator above, and the result it returns for them:
| Input | Sample value |
|---|---|
| Based On | Material strength and working stress |
| Strength (MPa) or Failure Load (kN) | 250 |
| Working Stress (MPa) or Working Load (kN) | 150 |
| Result | Value |
|---|---|
| Factor of Safety | 1.667 |
| Margin of safety | 66.7% |
| Allowable working value at FoS 1.5 | 166.67 |
| Reading | Typical range for structures and machines |
Tips for using the Factor of Safety Calculator
- Use higher factors for brittle materials, fatigue loading and where failure risks lives.
- Lifting equipment typically needs factors of 4–6 on breaking load.
